Aidan Turnbull
Director, BOMcheck.net, ENVIRON
Dr Aidan Turnbull is a Partner at ENVIRON and leads the global WEEE, RoHS and EcoDesign Practice and the www.BOMcheck.net substances declarations web database system. ...
|
Al Cabral
Product Development Manager, VJ Technologies, Inc.
Mr. Cabral has been involved with advanced manufacturing and new product introduction, along with process and product development within the electronics industry for 25 years. ...
|
Alan Cable
President, ACE Production Technologies
Alan Cable, the principle owner of ACE production technologies Inc. has over 40 years experience in the electronics manufacturing arena. Alan's expertise is high production ...
|
Andrew Brinks
Electronics Product Technical Specialist, Dow Corning
Andrew Brinks is a silicone specialist at Dow Corning. He specializes in silicone electronic materials including conformal coatings, encapsulants, gels, adhesives, and microelectronics materials. He ...
|
Arvind Partha
Manager, Technical Marketing, Olin Brass - Somers Thin Strip
Arvind Partha has a Ph.D. in Materials Science, from the Univ. of Illinois. He has 20+ years of experience in applications of metals in the ...
|
Bhanu Sood
Laboratory Director, CALCE, University of Maryland
Bhanu Sood is the Laboratory Director at the Center for Advanced Life Cycle Engineering (CALCE) and actively assists companies and organizations in all aspects of ...
|
Bill Coleman
Vice President Technology, Photo Stencil
For over 18 years, Dr. Coleman has been the vice president of technology for Photo Stencil, working closely with customers to understand their printing requirements. ...
|
Bill Schreiber
President, Smart Sonic Corporation
Mr. Schreiber developed the original ultrasonic stencil cleaning process in 1989. Obtained the only EPA Verification for specific parameters of Environmental Safety, User Safety and ...
|
Bill Vuono
Sr. Process Engineer, Raytheon Company
Bill Vuono is currently responsible for cleaning, underfill, adhesives, and coating applications. He has a history with soldering specifications dating back to WS6536 (Navy). Currently ...
|
Bjorn Dahle
President, KIC
Bjorn Dahle is the President of KIC. He has 20 years experience in the electronic manufacturing industry with various manufacturing equipment companies covering pick & ...
|
Bob Black
President and CEO, Juki Corporation
Mr. Black was the President and Co-Founder of Zevatech in 1977 and introduced first Pick and Place System at Nepcon West 1980. Bob is now ...
|
Bob Lazzara
VP, Marketing & Tech Support, Circuit Connect, Inc.
Bob has been in PCB design and fabrication since 1976. He has held elected positions in the SMTA and served as a committee member for ...
|
Bob Neves
CEO/CTO, Microtek Laboratories
Bob Neves has spent the last 27 years working for Microtek Labs involved in qualification, conformance and failure analysis of PCB's, PCBA's and the materials ...
|
Brandon Judd
Technical Support Engineer, Indium Corporation
Brandon is a Technical Support Engineer supporting Indium's advanced SMT materials, including solder pastes, thermal interface materials, and engineered solders. He specializes in the optimization ...
|
Brian Bauer
Business Manager, Heraeus Incorporated
Mr. Bauer has been in the SMT industry since 1982. He has been involved with the development, manufacture and technical support for the full range ...
|
Brian O'Leary
General Manager of International Sales, KIC
Brian O'Leary is responsible for KIC's international customers and distribution in Latin America, EMEA, Russia, India, Australia and New Zealand for the thermal management and ...
|
Brian Smith
General Manager - Electronic Assembly Americas, DEK
Mr. Smith has been supporting customers in the electronics assembly industry since 1994. His expertise is focused on solder paste printing and reducing soldering defects. ...
|
Brook Sandy
Product Support Specialist , Indium Corporation
Brook is Product Support Specialist for PCB Assembly Materials at Indium Corp. With a background in Chemical Engineering and previous experience with conductive adhesive new ...
|
Bryan Kerr
Principal Engineer - CMA Lab, BAE Systems
Bryan Kerr has 35 years experience in providing technical support to PEC assembly manufacturing. His experience ranges from analysis of materials and components to troubleshooting ...
|
Charlie Pitarys
Inside Sales Technical Manager, Kyzen Corporation
Charlie Pitarys has twenty-eight years of industry experience and has been with Kyzen Corporation for fourteen years. His previous employers include Hollis and Electrovert. Charlie ...
|
Chris Ellis
Sales Manager, Manncorp
Chris Ellis is a Sales Manager/Engineer for Manncorp with 19+ years experience in the PCB assembly equipment industry. Chris worked as a Manufacturing Engineer for ...
|
Chris Palin
European Manager, HumiSeal
Chris Palin is currently managing European sales and support for HumiSeal Conformal Coatings. His expertise is in test & reliability, solder technology, power die attach ...
|
Christian Ott
Sales Manager, Seho
Christian Ott knows electronic manufacturing companies around the world and their specific requirements. He has hands on experience with Selective, Reflow and Wave soldering processes. ...
|
Christopher B Cain
R&D Manager, Agilent Technologies
25 years of experience in research and development of board and IC ATE systems for Hewlett-Packard and Agilent Technologies. Currently leading R&D teams within Agilent ...
|
Clive Ashmore
Global Process Manager, Dek Printing Machine
Mr. Ashmore is responsible for the Global Applied Process Engineering group for DEK. Clive specializes in all aspects of manufacturing engineering, with special emphasis on ...
|
Daniel (Baer) Feinberg
Vice President, Fein-Line Associates
Mr. Feinberg is a forty-four year industry veteran and a former President of Morton Electronic Materials (Dynachem). Feinberg presently owns Fein-Line Associates, a management consulting ...
|
David Bergman
VP International Relations, IPC
David W. Bergman is Vice President of International Relations for IPC. He has worked at IPC for more than 30 years responsible for IPC standardization ...
|
David Bonito
Sales & Marketing Manager, Technical Manufacturing Corp.
David has been active in all areas of the contract electronics manufacturing industry for over fifteen years. He is currently in charge of all Sales ...
|
David Suihkonen
President, R&D Technical Services Inc.
David is President at R&D Technical Services, a vapor phase reflow oven manufacturer. he has 20 plus years experience in the vapor phase reflow industry. ...
|
Don Naugler
General Manager, VJ Technologies, Inc.
Don is the General Manager of VJ Technologies, Inc., a leading manufacturer of X-ray Inspection and Rework equipment for the electronics manufacturing industry. He has ...
|
Doug Dixon
Global Marketing Director, Henkel Electronics
Mr. Dixon has been in the electronics field for over twenty years and is the Global Marketing Director with the electronics group of Henkel. Prior ...
|
Doug Pauls
Principal Materials and Process Engineer, Rockwell Collins
Doug Pauls has a bachelors in Chemistry & Physics, Carthage College, BSEE, Univ of Wisc Madison. He has 9 years working experience for US Navy ...
|
Dr. Craig D. Hillman
CEO & Managing Partner, DfR Solutions
Dr. Hillman's specialties include best practices in Design for Reliability, strategies for transitioning to Pb-free, supplier qualification, passive component technology and printed board failure mechanisms. ...
|
Dr. David Bernard
Product Manager, Dage Precision Industries
Mr. Bernard has been the X-ray Systems Product Manager at Dage for over 5 years and have been involved in all aspects of x-ray inspection ...
|
Duane B. Mahnke
President , DBMahnke Consulting
Duane Mahnke is a materials expert having developed thin film dielectric and adhesive systems for various packaging, flex and rigid-flex applications. Hi is the chairman ...
|
Edward Zamborsky
Regional Sales Manager, OK International Inc.
Mr. Zamborsky serves as one of OK's technology advisers to the Product Development group. Ed has authored articles and papers on topics such as; Low ...
|
EH Lim
Managing Director, Asia Pacific, ECD
EH Lim has been in the PCB Assy industry since 1985, starting at Thomson/Singapore for 5 years before moving to Electrovert Asia Pacifc. Lim was ...
|
Eric Camden
Lead Investigator, Foresite, Inc
Eric has been in the electronics industry for over 10 years and manages the C3 technical user group, Failure Analysis project management, Rescue Cleaning Division ...
|
Fern Abrams
Director, Government Relations and Environmental Policy, IPC
Fern Abrams is the Director of Government Relations and Environmental Policy for IPC. She is responsible for advocating member positions in the areas of environment, ...
|
Francois Monette
VP Sales & Marketing, Cogiscan
Mr. Monette is one of the co-founders of Cogiscan and leads global sales, business development and marketing. Since 1990, he has held a variety of ...
|
Fritz Byle
Process Engineer, Astronautics
Fritz's career in electronics manufacturing has included diverse engineering roles including PWB fabrication, thick film print & fire, SMT and wave/selective solder process engineering, and ...
|
Garry McGuire
Sr. Engineer, NASA/Marshall Space Flight Center
Garry McGuire is a manufacturing process engineer and Chair of the IPC J-STD-001 and IPC/WHMA A-620 Space Addendum committees. ...
|
Gary Goldberg
President and CEO, PROMATION, Inc.
Mr Goldberg has practical experience in production line layout, process flow and cycle rate analysis. He knows how to avoid bottle necks and most related ...
|
Gerald Gardener
Sales Manager, JBC Tools Inc
With over 10 years experience in design and product development, I offer technical support to our US Sales force and liase with our Europe based ...
|
Gerard O'Brien
President, S T and S Testing and Analysis
Gerald O'Brien is Chairman of ANSI J-STD 003, and Co Chairman of IPC 4-14 Surface Finish Plating Committee. He is a key member of ANSI ...
|
Greg York
Technical Sales Manager, BLT Circuit Services Ltd
Greg York has twenty two years of service in Electronics industry. York has installed over 350 Lead Free Lines in Europe with Solder and flux ...
|
Gregory Arslanian
Global Segment Manager, Air Products & Chemicals, Inc.
Mr. Arslanian has been involved in electronics packaging processing and equipment since 1981 including flipchip, TAB, wirebonding and die attach. Current responsiblities include R&D, applications, ...
|
Harold Hyman
Consultant, VJ Electronix
Harold Hyman has been involved in metallurgical aspects of the electronics industry since the 1950's, and in semiconductor development and engineering for STL, Ediswan & ...
|
Harry Jin
Product Manager, CheckSum LLC
Harr Jin has over 35 years experience in board test as a user, designer, manager and vendor. He has worked for Teradyne and Agilent Technologies ...
|
Hartmut Berndt
President, B.E.STAT group
Mr. Burndt has been in Electronics & Semiconductor Technology since 1980 and work in the area of Electrostatic (ESD) and electronic devices. He is President ...
|
Jack Crawford
Director - Certification & Assembly Technology, IPC
Mr. Crawford is Director of Certification and Assembly Technology for IPC. He is technical liaison to the IPC committees that maintain critical industry standards and ...
|
Jack Fisher
Chairman of the IPC Technology Roadmap Committee, Interconnect. Technology Analysis Inc.
Jack Fisher is a retired IBM executive, chairman of the roadmap since 1994, and member of IPC Hall of Fame. ...
|
Jade Bridges
R&D Manager, Electrolube Ltd
Jade Bridges is the R&D Manager for Electrolube. She is responsible for new product development and technical support within the Electrolube range. Her expertise is ...
|
James Brenner
Marketing VP, Master Bond
Mr. Brenner has over 35 years of experience in developing innovative epoxy adhesives and solving problems to meet the needs of manufacturing companies in the ...
|
James Mahoney
Applications Project Manager, Quick Turn Flex Circuits LLC
James Mahoney is a Technical Operations Manager with a 20 year track record in managing new product introduction. He is a skilled leader, motivator and ...
|
Jeff Ferry
President, Circuit Technology Center, Inc.
Mr. Ferry is President of Circuit Technology Center, a world-leading contractor for the repair and rework of assembled circuit boards founded in 1983. Jeff also ...
|
Jim Hall
Principal Consultant, ITM Consulting
Jim has a wealth of knowledge in soldering and thermal technology, equipment and process basics and is a pioneer in the science of reflow technology. ...
|
Jim Williams
Chairman, Polyonics, Inc.
Jim Willimas is a PhD Chemist in Polymers and Materials Science. He specialize in printing, cleaning, inks, and coatings used in electronics manufacturng operations. Williams ...
|
Joe Belmonte
Principal Consultant, ITM Consulting
Mr. Belmonte has been a process engineer and process engineering manager in the electronic manufacturing industry for over 25 years, with experience in all aspects ...
|
John Norton
Eastern Manager, Vitronics Soltec
John Norton started his soldering career in 1983 for Hollis Engineering. He has also worked with Electrovert as a technical training manager and Vitronics Soltec ...
|
John Perrotta
VP, Europlacer North America, Europlacer North America
John Perrotta has been directly involved in the SMT Industry since 1995. John was formally educated in Applied Statistics and Manufacturing Engineering. He has 20 ...
|
John Sharp
Corporate Product Compliance Manager, TriQuint Semiconductor, Inc.
John has focused on Product Compliance and Environmental & Safety issues throughout his career. He has a B.S. in Chemical Engineering, an M.S. in Chemical ...
|
John Vivari
Application Engineering Supervisor, Nordson EFD
Mr. Vivari has more than ten years of electronic engineering design and assembly experience. His expertise in fluid dispensing and solder paste technology assists others ...
|
Joseph S. Bubel
President, Hesse & Knipps, Inc.
Joseph Bubel is heavily involved in the industry and has been since 1980. Mr. Bubel possesses strong technical knowledge of the complete semiconductor manufacturing process. ...
|
Jurgen Vos
Director of Product Management, PTC
Jurgen Vos is a software specialist responsible for the implementation of IPC-175x solutions. He is also a co-chair of the committee responsible for the IPC1751A ...
|
Karl Seelig
Vice President of Technology, AIM
In his 25 years of industry experience, Mr. Seelig has authored over 30 published articles on topics including lead-free assembly, no-clean technology, and process optimization. ...
|
Karthik Vijay
Technical Manager, European Operations, Indium Corp.
Karthik Vijay is the Technical Manager for Indium Corporation's European Operations. He is based in the UK and is responsible for technology programs and the ...
|
Ken Bliss
President & CEO, Bliss Industries, Inc.
Mr. Bliss has 20+ years experience creating process methods that improve profitability by maximizing hidden unused capacity and throughput. Ken has expertise in all areas ...
|
Keshava Murthy
Process Engineer, Bosch Automotive Electronics India Ltd.
Keshava Murthy is a Process Engineer in the PCB assembly industry working in Bangalore, India. ...
|
Krista Crotty
Chief EcoGeek, Alberi EcoTech
Krista Crotty has knowledge of RoHS, WEEE, REACH and other product environmental compliance initiatives. ...
|
Lee Levine
President, Consultant, Process Solutions Consulting Inc
Lee Levine has been a Process Engineer and Metallurgist in the semiconductor industry for 30 years. He now operates his own company Process Solutions Consulting ...
|
Lee Wilmot
Director, EHS, TTM Technologies
Lee Wilmot has 20+ years doing EHS work in the PCB/PCBA industries, including environmental compliance, OSHA compliance, workers compensation, material content declarations, RoHS & REACH ...
|
Leo Lambert
Vice President, Technical Director, EPTAC Corporation
At EPTAC Corporation, Mr. Lambert oversees content of course offerings, IPC Certification programs and provides customers with expert consultation in electronics manufacturing, including RoHS/WEEE and ...
|
Linda Woody
SME Production Technical Excellence Staff, Lockheed Martin
Subject matter expert in the field of electronics assembly and soldering. ...
|
Mahendra Gandhi
SME - PWB Technologies, Northrop Grumman
Mahendra Gandhi has been working in interconnect industry since 1972. ...
|
Marc Peo
President, Heller Industries Inc.
Mr. Peo has been with Heller Industries for over 20 years and has been President for the past 8 years. Marc has authored several industry ...
|
Mark Finstad
Senior Applications Engineer, Flexible Circuit Technologies
Mark Finstad has over 30 years in the flex circuit industry in both design and manufacturing. He is a regular speaker at IPC APEX (Professional ...
|
Mark Frimann
Product Stewardship Management, Texas Instruments
Mark Frimann has been working in electronic industry regulations and standards on chemical and material restrictions, and how this is dealt with in the supply ...
|
Mark J. Curtin
President, Transition Automation, Inc.
Mr. Curtin recieved his BSME with honors from the University of Rhode Island in 1985, and subsequently worked for HP (Medical Products), before founding Transition ...
|
Mark McMeen
VP Engineering Services, STI Electronics Inc.
Mark T. McMeen is STI Electronics Inc.ʼs Vice President of Engineering Services. He oversees the daily operations of the Engineering Services division of STI. He ...
|
Mark Waterman
Engineer / Trainer, Electronic Controls Design, Inc. (ECD)
Mark Waterman is a trainer and field engineer with 17 years experience in service and applications specialties. Intimate knowledge of soldering processes and measurement systems. ...
|
Michelle Ogihara
Sales and Marketing Manager, Seika Machinery Inc.
Michelle is the Sales and Marketing Manager of Seika Machinery, Inc. She is an active member of the SMTA taking on a past position as ...
|
Mike Bixenman
CTO, Kyzen Corp.
Mr. Bixenman is the CTO for Kyzen Corp. Kyzen Corp. is a leading provider of engineered cleaning fluids for high technology manufacturing environments. ...
|
Mike Bryant
VP R&D, BGF Industries
Worked in R&D, Tech Service and QC for BGF for 40+ years. Materials include glass fabrics, aramids, and carbon fiber. Much of this time spent ...
|
Mike Green
Design Engineering, Lockheed Martin Space Systems
Mike Green is co-chairman of the IPC Terms and Definitions Committee. He has been working with board design and manufacturing for 33 years. ...
|
Mike Jones
Vice President, Micro Care
Mr. Jones is an electronics cleaning and stencil printing specialist. Averaging over one hundred days a year on the road, Mike visits SMT production sites ...
|
Mike Konrad
President, Aqueous Technologies
Mr. Konrad has been in the electronic assembly equipment industry since 1985. He is founder and CEO of Aqueous Technologies Corporation, a manufacturer of automatic ...
|
Mike Schwartz
Director of Marketing, Manncorp
Mike Schwartz is Founder & CEO of B2B ad agency, MSA Advertising in Philadephia. He retired after 47 years, but was soon hired by a ...
|
Mike Scimeca
President, FCT Assembly
Mike Scimeca created FCT Assembly after the purchase of Fine Line Stencil, Inc., and consists of two major operations: stencil manufacturing and the manufacturing of ...
|
Mitch DeCaire
Sales Manager (Americas), Cogiscan, Inc.
Mitch DeCaire, Sales Manager at Cogiscan, has served the electronics manufacturing industry since 1989. His prior experiences include process engineering, business development, and engineering management ...
|
Molly O'Hara
PCB Fabrication Expert, Sunstone Circuits
Molly O'Hara has 15 years of experience in the electronics industry, specifically related to PCB Fabrication. Her strong background in this space has led to ...
|
Neil O'Brien
Sales Director, Finetech
Neil O'Brien has worked in the field of electronic manufacturing equipment for over fifteen years and is currently Sales Director for Finetech, a manufacturer of ...
|
Neil Poole
Senior Applications Chemist, Henkel Electronics
Dr. Poole is a Senior Applications Chemist in Henkel Technologies, electronics assembly materials application engineering group. He is responsible for all of Henkel's assembly products ...
|
Nick Koop
Product Manager, Minco Products Inc
Nick has been in the circuit industry since 1985, in technical and management roles. Nick is the Vice Chair of the IPC Flexible Circuits Committee, ...
|
Paul Austen
Senior Project Engineer, Electronic Controls Design Inc
Paul Austen is a 30 year veteran Senior Project Engineer with ECD in Milwaukie, Oregon. Paul has seen and worked with the electronic manufacturing industry ...
|
Paul J. Koep
Global Product Manager, Alpha - Cookson Electronics
Mr. Koep is responsible for product planning and technical marketing for the Preform Products at Alpha, part of Cookson Electronics. He is the co-author of ...
|
Peter Biocca
Senior Market Development Engineer, Kester
Mr. Biocca is a chemist with 24 years experience in soldering technologies. He has presented around the world in matters relating to process optimization and ...
|
Peter Greenland
VP Sales & Marketing, Pycon Inc.
Mr. Greenland has 20 years electronics industry experience ranging from circuit board design to product support & repair services. Peter has spent the last 4 ...
|
Peter Vigneau
General Manager, Circuit Technology Center, Inc.
Mr. Vigneau is the General Manager of Circuit Technology Center, a world-leader in the repair and rework of populated and non-populated circuit boards. Peter has ...
|
Phil Kinner
European Sales Manager, PVA Inc
Phil Kinner is European Sales Manager of PVA, Inc. ...
|
Pierce Pillon
Laboratory Mgr., Techspray
Pierce Pillon is the Laboratory Manager and lead formulations chemist at Techspray, a division of Illinois Tool Works (ITW) and a leading manufacturer of chemical ...
|
Raimund Faber
General Manager Sales & Marketing, SMT-Wertheim
Raimund Faber has a strong background in the field of reflow soldering process, metalization process for solar cell backend application, and process engineering. He has ...
|
Ray Prasad
President, Ray Prasad Consultancy Group
Ray Prasad is the founder of Ray Prasad Consultancy Group which provides teaching, consulting and technical expert services in tin-lead and lead free technologies using ...
|
Renee Michalkiewicz
General Manager, Trace Laboratories
Renee has been with Trace and an IPC member for 16 years. She has managed all military and commercial PB qualification and conformance testing and ...
|
Richard Boyle
Global Product Champion, Henkel Electronics
Richard Boyle is a Global Product Champion at Henkel Electronics. He has over 25 years experience in the electronics assembly industry and is responsible for ...
|
Richard Burke
National Sales Manager, Datapaq
Mr Burke currently has eight years of thermal profiling experience in the Electronics Assembly industry including SMT, Wave, Curing, Wafer Bumping, Ceramics and a host ...
|
Richard D. Stadem
Advanced Engineer/Scientist, General Dynamics
Richard D. Stadem is an advanced engineer/scientist for General Dynamics and is also a consulting engineer for other companies. He has 38 years of engineering ...
|
Richard Heimsch
Director, Protean Marketing
Now a director at Protean Marketing, Mr. Heimsch has worked in the electronics industry 25+ years in a wide variety of international sales, marketing and ...
|
Rick Fiacco
Global Director of Sales, APS Novastar
Rick Fiacco has 30 years experience in Interconnect Industry with a focus on Product Development/Marketing and Business Development. Fiacco holds two patents in cable and ...
|
Rick Perkins
Chemical Engineer / Owner, Chemical Logic Inc
Rick Perkins is a chemical engineer with more than 25 years of Materials & Processes experience. He has worked with Honeywell Aerospace in high-reliability manufacturing, ...
|
Robert Dervaes
V.P. Technology & Engineering, Fine Line Stencil, Inc.
Robert Dervaes has worked in the electronics industry since 1992 in both design and manufacturing. Over the past 11 years he has established the technical ...
|
Rocky Hilburn
Product Manager, Insulectro
Microdrilling is a passion for Rocky Hilburn. His background and expertise encompasses: Test Methods for Flexible Circuits and Base Materials; Copper-Aluminum-Copper; Metallic substrate laminates; Embedded ...
|
Rodney Miller
Capital Equipment Operations Manager, SCS Coatings
Rodney is currently Operations manager at SCS coatings, Global Leader in Parylene and Liquid Coating equipment. Rodney applies his 20+ years of diverse manufacturing to ...
|
Russell Shepherd
Laboratory Director, Microtek Laboratories
Shepherd is a Laboratory Director at Microtek Laboratories. He has been in the PWB industry for over 25 years in both manufacturing and testing. Shepherd ...
|
Sandip Thakor
Quality Engineer, Matrix Telecom Solution P Ltd
Sandip Thakor has 9 years of experience in electronics industry specializing in soldering technology. Thakor has experience in lead free installation, process optimization and developing ...
|
Scott F. Cain
Global PCB Sales Manager, InsulFab PCB Tooling
Scott Cain is the Sales Manager for the premier PCB Tooling Solution company in the industry, InsulFab PCB Tooling. Cain has seen every application and ...
|
Scott Rushia
Sales Manager - Martin Products, Martin
Scott Rushia is a Sales Manager with Martin and is responsible for sales and service for Martin's rework and dispensing products. He has over 11 ...
|
Scott Wischoffer
Marketing Manager, Fuji America Corporation
Scott Wischoffer has been in the SMT industry since 1986 with experience in service, training, sales & applications, and marketing. ...
|
Simon G. Norman
International Director, EVS International
Simon G. Norman is the international director for EVS International, the Leader in Solder Recovery. ...
|
Sjef van Gastel
Manager Advanced Development, Assembleon
Sjef van Gastel is manager of advanced development at Assembleon Netherlands B.V. He is responsible for technology roadmapping, technology investigations leading towards new machine concepts ...
|
Srinivas Chada, Ph.D.
Technical Services Manager , Henkel Electronics
Srinivas Chada, Ph.D. is a Technical Services Manager at Henkel Electronics. Prior to joining Henkel, Dr. Chada held senior level managerial, engineering, and research positions ...
|
Srivatsan Mani
Device Support Engineer, BPM Microsystems
Srivatsan Mani is responsible for algorithms and hardware that provide electrical and firmware capability to program non-voltaile memories. These Memories may be stand alone or ...
|
Stephanie Castorina
Manager, Environmental Programs, IPC
Stephanie Castorina has been the manager of environmental programs at the IPC since September 2008. She is responsible for monitoring environmental policies and communicating potential ...
|
Stephanie Henninger
Director, Integrated Ideas & Technologies, Inc.
Stephanie Henninger is the Director of Technical Services & Marketing for Integrated Ideas & Technologies, Inc., a premier manufacturer of SMT stencils. She has been ...
|
Steve Cook
Director of Product Technology, Techspray
Steve Cook is the Director of Product Technology at Techspray, a division of Illinois Tool Works (ITW) and a leading manufacturer of chemical products for ...
|
Steve Pollock
Vice President, Essemtec USA
Steven Pollock has worked in the industry for OEMs, and large CMs before moving to application Sales. Pollock has been working in SMT industry for ...
|
Subrat Prajapati
Supplier Quality Leader, Ge Healthcare
Subrat has 10 year of extensive experience in PCB assembly process optimizing for quality, process includes screen printing, wave, reflow. He has a copyright in ...
|
Terry Jeglum
President/CEO, Electronic Technology Corporation
Mr. Jeglum has 35+ years experience and is the founder of Electronic Technology Corporation. He is responsible for 22 years of program management for the ...
|
Terry Munson
President/Senior Technical Consultant, Foresite
Mr. Munson, President and Founder of Foresite, has extensive electronics industry experience applying Ion Chromatography analytical techniques to a wide spectrum of manufacturing applications. ...
|
Tim Jensen
Product Manager, Advanced Assembly Materials, Indium Corp.
Timothy Jensen is the Product Manager for Indium Corporation's PCB Assembly Materials and has spent over a decade troubleshooting and optimizing SMT process lines. Having ...
|
Tim Kardish
CEO, APS Novastar
Tim Kardish is a technology business leader with 26+ years experience in the PCB, SMT and AOI assembly equipment industry. Tim is the CEO and ...
|
Todd O'Neil
Sales Manager, Soldering products, JUKI Automation Sys.
Mr. O'Neil has been part of the electronics manufacturing field for 17 years. As Sales Manager for all Soldering products at JUKI, his main objective ...
|
Tom Forsythe
Vice President, Kyzen Corporation
Mr. Forsythe is a recognized expert in cleaning chemistries and processes. Tom has a Bachelor's in Applied Mathematics & Engineering from the US Naval Academy. ...
|
Umut Tosun
Application Technology Manager, Zestron America
Mr. Tosun has published numerous technical articles. As an active member of the SMTA and IPC organizations, Mr. Tosun has presented a variety of papers ...
|
Wayne Wagner
President, Krayden Inc.
Wayne Wagner has over 25 years in the conformal coating industry and is the president of Krayden Inc., a leading distributor of engineered materials. ...
|
