Circuitnet Logo
   We search for industry news, so you don't need to.
February 10, 2012
Circulation Over 51,000
Ask the Experts Index
You submit the questions, our Panel of Experts submit the answers.
Questions  I   Submit a Question  I   Experts Panel  I   Join the Panel
July 16, 2007

Acceptable "reject rate" for hand assembly

What is an What is an acceptable "reject rate" for a total hand assembly, through hole operation line. I have established a less than .10% of all total hand placed through hole components for our load room.

We are a small low volume, high mix firm, using through hole boards, wave soldered. Is this a reasonable level to expect from our process?

 Robert Bartolotta

Experts Comments

Typical first pass yield on hand assembly is 5000 ppm.
image
Dr. Craig D. Hillman
CEO & Managing Partner
DfR Solutions
Dr. Hillman's specialties include best practices in Design for Reliability, strategies for transitioning to Pb-free, supplier qualification, passive component technology and printed board failure mechanisms.
Additional Comments
No additional comments have been submitted.

Submit a comment - Add to the discussion.

Your Name
Your Email
Company
Country
Comment
  All comments are reviewed prior to posting. We will only post a comment that includes a name and company. You will receive an email if your comments are posted.
 
Home  |  About Us  |  Advertising  |  Advertising Rates  |  Ask the Experts  |  Calendar  |  Contact Us  |  Free Subscription
Industry Forums  |  Exclusives  |  Letters  |  News  |  Press Releases  |  Viewpoint  |  White Papers

Search Category       Search Term   
To search a phrase, place it in quotes.
We search for industry news so you don't need to.

Circuitnet LLC, 22 Parkridge Road, Haverhill, MA 01835 USA
Copyright © 2012 Circuitnet.    All rights reserved.
Jeff Ferry, Publisher  | Ken Cavallaro, Business Manager

Semiconductor Packaging News - Semiconductor and advanced packaging news and information.