We search for industry news, so you don't need to.
 
Home  I  Site Map  I  News  I  Corporate News  I  Exclusives  I  Experts  I  Equipment  I  Marketplace  I  Calendar
September 22, 2008


Wasting Money on Nitrogen?
Totech Super Dry® Storage and Drying Solutions
Super DryNitrogen cabinets are an obsolete and wasteful way to store Moisture Sensitive Devices (which include PWBs). And they don't even do a very good job. Instead, you can safely store and dry your MSDs while protecting against damaging oxidation. Learn more…
Totech


 
A Circuit Board Operating Room
In one benchtop kit
Professional Repair KitThe Professional Repair Kit is the most complete and versatile circuit board repair kit you'll find anywhere. Repair SM and BGA pads, plated holes, conductors, base board... The total package.
CircuitMedic

Letters Submit
Industry Forums  
PCB Solderable coatings
Conformal Coating Benchtop Application Equipment
Aperture recommendations for 0.5 mm Ball spacing

 
Compliant pin pressing
Press pins or compliant pin connectors
Compliant pin pressingFancort air or servo presses with custom tooling are designed to control the force of pressing compliant pins into PCBs without risk. Eliminate hand operations. Models from 1 to 20 tons. Click here to learn more…
Fancort Industries
Top Story  
Wistron Considers Dell Factory Takeover
Wistron Corp. is assessing the feasibility of taking over Dell`s overseas assembly factories, which Dell plans to sell in hope of cutting costs ...
China Economic News Service

Metal Squeegee Design:
The Vital Part of the SMT Process
Vital Part of SMT ProcessEvery SMT Engineer should know the latest squeegee technical support information on this small, vital tool which increases performance of the SMT line. This presentation is a comprehensive collection of technical tips and advice about SMT printing. Click here to view…
Transition Automation
Industry News  
REACH update: 'Substitute It Now' Substances of Very High Concern list released
The EU environmental NGOs through the International Chemical Secretariat has released its "Substitute It Now" list of 220 chemical substances ...
EDN
What Dell must do
Every time I hear bad news about Dell's quarterly earnings and compare it to stories about Hewlett-Packard, I keep wondering what Dell can do to ...
Market Watch
Three Traits of a Tough Leader
Who's next?" is a question that senior executive and succession planning committees consider with regularity. Amid the debate about who can ...
Harvard Business Publishing
Palm Smartphone Sales Climb 49% but Losses Widen
While its smart phone sales jumped 49 percent, Palm reported wider losses for its first quarter of fiscal 2009, compared to the same period last ...
Twice
Lenovo and others launch new Intel servers
Since Intel's launch of its new Xeon 7400 series chips for high-end servers, several key manufacturers including IBM, Unysis, Sun ...
eChannelLine
Acer gunning for HP and Dell
Top three vendor sets out target to dethrone number one and two by 2011. Acer used its global press conference in Budapest to outline its plans ...
PC Retail
Power at your fingertips: Latest tech devices creating buzz with shocking size, capabilities
Years ago, when Jim Barry traipsed across the country to show off the latest and greatest consumer electronics gadgets to the news media, ...
Deseret News
Treasury, Congress ramp up bank bailout talks
The Bush administration and Congress on Sunday ramped up talks on an unprecedented $700 billion bank bailout as they battled the clock to ...
Reuters

Providing High Reliability Class 3 CEM Services
Technical Manufacturing Corporation
Class 3 CEM ServicesContract electronics manufacturer TMC specializes in the CLASS 3 production of printed circuit board and interconnecting cable assemblies for high-reliability applications with particular emphasis in the aerospace, defense, medical and automotive industries. Learn more…
Technical Manufacturing Corporation

Technology News  
Hadron Collider halted for months
The Large Hadron Collider near Geneva will be out of action for at least two months, the European Organization for Nuclear Research (Cern) ...
BBC News
Scientists lay foundations for exascale computing
Having crashed through the petaflop barrier of a thousand trillion calculations per second back in June, scientists are continuing work ...
Gizmag
New dwarf planet named Haumea for Hawaiian goddess
Pluto and its dwarf planet brethren have a new friend. The International Astronomical Union (IAU) announced the name of a new dwarf planet to ...
USA Today

Lead-free Solder with a 9 Year Track Record
SN100C - A billion boards and no failures
SN100CNihon Superior's SN100C Sn-Cu-Ni-Ge alloy is the only non-SAC alloy that has a track record of 9 years of successful use in commercial mass production with no service failures. Learn more…
Nihon Superior
Corporate News Submit
Inspecting small wire diameters at high speeds is now possible
Viscom's S6053BO-V brings the newest generation of fully automatic wire bond inspection systems to market. The inspection system was conceived ...
Viscom
Boundary Scan Module extends structural Test Coverage to DIMM240 Interfaces
GOEPEL electronic officially announces the market introduction of CION Module/DIMM240 as another Boundary Scan I/O module of the CION ...
GOEPEL electronic
Orchid Tech Completes High-speed AdvancedTCA Carrier Blade
Orchid Technologies Engineering & Consulting, Completes the Development of a High-speed AdvancedTCA Carrier Blade Design based on a Freescale ...
Orchid Technologies Engineering & Consulting
Bliss Industries Introduces the new Easy Lift
Bliss Industries Inc. announces the new Easy Lift, an ergonomic solution with 20" of adjustable worksurface. The Easy Lift serves as a workbench ...
Bliss Industries Inc.
SMTA Long Island Academy October 22-23
Please plan to join us in New York at the Hyatt Regency Long Island for the SMTA Long Island Academy on October 22-23, 2008. The SMTA Academy ...
SMTA
BTU International to Highlight Pyramax 75 at IPC Midwest
BTU International will promote the Pyramax 75 in booth 812 at the upcoming IPC Midwest show, which will take place September 24-25, 2008 ...
BTU International
FINETECH to Demonstrate Compact Rework System at IPC Midwest
FINETECH will exhibit the FINEPLACER® CRS 10 Compact Rework System in booth #809 at IPC Midwest 2008, scheduled for September 24-25, 2008 in ...
FINETECH
ESSEMTEC to Introduce SP150 at IPC Midwest
Essemtec announces that it will debut the SP150 printer in booth 907 at the upcoming IPC Midwest exhibition & conference, scheduled to take ...
ESSEMTEC
YESTech to Showcase 3-D X-Ray at IPC Midwest
YESTech will showcase its new X3, 3-D X-Ray inspection, F1 AOI and B-UV automated conformal coating inspection systems - at this years IPC ...
YESTech
ESSEMTEC to Feature EXPERT-SAFP Prototyping Station at IPC Midwest
Essemtec announces that it will display EXPERT-SAFP universal prototyping station in booth 907 at the upcoming IPC Midwest exhibition & ...
Essemtec
ZESTRON America to showcase VIGON A 250 at IPC Midwest
ZESTRON America will showcase VIGON A 250, a newly developed MPC technology based defluxing agent for spray-in-air processes with low ...
ZESTRON America
IPC Midwest Show to Feature Innovative Products
With just a few days until the opening of IPC Midwest Conference & Exhibition on Wednesday, September 24, 2008, at the Renaissance ...
IPC
ASC International to Showcase True 3D SPI at IPC
ASC International announces that it will highlight its most advanced true 3D SPI systems at booth 904 at the upcoming IPC Midwest Conference and ...
ASC International
Juki to Feature the 350 Selective Soldering System at IPC Midwest
Juki Corporation announces that it will showcase its 350 Selective Soldering System to the electronics industry in booth 809 at the ...
Juki Corporation

Quickly program SMT, AOI & ATE
from CAD, Gerber or BOM
Quickly programCreate fast process assembly sheets, 1st Article inspection, costing reports, rework, debug, etc. Cost effective manufacturing software & product tracking MES from Unisoft. Learn more…
Unisoft
Today's Sponsor

Juki excels at NBS
CEO proclaims – "They just don't break!"
Juki at NBSCraig Acuri, CEO of NBS Design has been using Juki equipment over 4 years with 100% uptime. The Juki equipment provides great flexibility to run any type of job, even 01005 components. Juki has helped us maximize production and increased profitability, learn more…
Juki


 
The 1st Fully Integrated
Paste & Glue Dispenser in a Printer
imageEKRA releases IPaG, Single and Dual Head Dispensers. Fast and easy to program, the dispenser is capable of dispensing paste or glue and inspecting the deposit all within the printer…
EKRA


 
Asymtek's new DispenseJet® DJ-100
combines high speed accuracy & process control
Dispensejet DJ-100 The DJ-100 is ideal for dispensing fluids at speeds up to 150 dots per second as small as 0.002 µl (2 nl). Users will benefit from Asymtek's 15 years of jetting expertise that improve fluid control, offer better repeatability, learn more…
Asymtek

 

 
Heraeus - Celebrating 40 years
of USA Manufacturing Excellence
Celebrating 40 years in USAHeraeus has been developing, manufacturing and supporting Assembly Materials in Pennsylvania for the last 40 years. While competitors are focusing off shore, Heraeus is committed to the Americas. Learn more about Heraeus materials…
Heraeus, Inc.


Home  |   About Us  |   Advertising  |   Advertising Rates  |   Archives  |   Ask the Experts  |   Calendar  |   Corporate News  |   Contact Us
Free Subscription  |   Industry Forums  |   Equipment Mart  |   Exclusives  |   Letters  |   Circuitmart  |   News  |   Site Map  |   Viewpoint  |   White Papers


Search Category       Search Term   
To search a phrase, place it in quotes.
We search for industry news so you don't need to.

Circuitnet LLC, 135 Ward Hill Avenue, Haverhill, MA 01835 USA
Copyright © 2008 Circuitnet.    All rights reserved.
Jeff Ferry, Publisher  | Ken Cavallaro, Business Manager

Visit Semiconductor Packaging News for the latest semiconductor and advanced packaging news and information.