“adhere” at Intertronics are acknowledged experts in the field of adhesives for electronics and other high-tech precision industries – so their launching of a new light-weight dispensing valve is likely to be of interest to development and production engineers alike. The Fisnar CV629 Cartridge Valve is a pneumatically operated valve designed for precision dispensing of all types of fluids, such as solvents, oils, silicones, glues, UV adhesives, inks, etc. Shot sizes may be fine tuned by the adjustment screw at the top of the valve; hence the CV629 valve is recommended for applications where micro deposits are required.

Weighing only 135g, the CV629 cartridge valve is one of the few valves that can be comfortably held in the hand without stress, and so is ideal for manual operations where an operator needs to apply frequent dispensing deposits. The CV629 features aligned air/material inlets to enable close side-by-side mounting of multiple valves as well as replaceable cartridge seals and a capacity to handle a wide range of material viscosities at up to 300psi. The valve is also recommended for integration in an automated system, or simple dispensing robot, where the quick-change one-piece cartridge seal ensures minimal maintenance and reduced down time. Further information regarding Intertronics’ products can be found at www.intertronics.co.uk.