
We search for industry news, so you don't need to.
|
|
|
|
|
|
|
|
|
|
|
January 14, 2008
Lead Free Surface Finish
What is the shelf life for PCB's with a Sn/Ag/Cu surface finish (96.5/3.0/0.5)?
Can you steer me to some supporting documentation?
J. O.
This "Ask the Experts" page has been viewed 593 times.
Ask the Experts Comments
January 14, 2008
There is limited data on shelf life for SAC HASL
I would recommend you use the IPC steam aging test to independently confirm shelf life.
Dr. Craig D. Hillman, CEO & Managing Partner
DfR Solutions
chillman@dfrsolutions.com
Dr. Hillman's specialties include best practices in Design for Reliability, strategies for transitioning to Pb-free, supplier qualification (commodity and engineered products), passive component technology and printed board failure mechanisms. Dr. Hillman has over 30 publications and has presented on a wide variety of reliability issues to over 150 companies and organizations.
|
|
|
|
|
|
|
|