|
|
|
|
June 25, 2007
Monitoring temperature and humidity
What recommendations can you share about a monitoring an SMT area to record/monitor the temperature and humidity?
Is there any kind of a data logger machine that indicates such readings aside from the regular thermo-hygro measuring device?
E.R.
This "Ask the Experts" page has been viewed 666 times.
Ask the Experts Comments
June 25, 2007
I just checked the web page with a search on Temperature/humidity monitoring systems. Lots of information available, but there are some smaller units which could be used for specific areas of the plant such as a surface mount area.
Another way would be to contact the maintenance people in the facility or an air conditioner company and have them send a representative to evaluate the total cubic volume area and determine the size of equipment which will be needed.
Leo Lambert, Vice President, Technical Director
EPTAC Corporation
leo@eptac.com
 At EPTAC Corporation, Mr. Lambert oversees content of course offerings, IPC Certification programs and provides customers with expert consultation in electronics manufacturing, including RoHS/WEEE and lead free issues. Leo is also the IPC General Chairman for the Assembly/Joining Process Committee, covering areas of mounting, soldering, solderability and assembly.
|
|
|
|
